-
Easy to install, reposition, and remove
Enjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall and floor graphics. Tested and approved for indoor smooth floor graphics
-
Reduce the environmental impact of printing
Offer an adhesive fabric that complies with high health standards. Help meet environmental and safety objectives with this REACH compliant,1 flame-resistant2 adhesive fabric.
-
Grab attention with vibrant image quality for a variety of applications
Capture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications.
Ink compatibility |
Compatible with HP Bright Office Inks, HP Vivid Photo Inks, PageWide XL and HP Latex Inks |
Core size |
3-in core with a removable 2-in adapter |
Weight (With liner) |
289 g/m² per ISO 536 Test Method |
Thickness (With liner) |
304 microns/12 mil per ISO 20534 Test Method |
Liner |
120 g/m², double-sided PE-coated silicone paper |
Adhesive |
Clear, removable, and repositionable adhesive |
Removability |
Up to 3 years removable/repositionable indoors |
Opacity |
Greater than 85% per TAPPI T-425 Test Method and ISO 2471 Test Method |
Brightness |
Greater than 87% per Tappi-T452 Test Method |
Whiteness |
118 per ASTM E313-98 Test Method |
Finish |
Matte |
Slip rating |
Certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)4 |
Operating temperature |
15 to 25° C / 59 to 77° F |
Operating humidity |
20-80% RH |
Water resistance |
Moderately water-resistant3 |
Wind orientation |
Print side out |
Dry time |
Immediate |
Flame resistance |
Class A, ASTM E842 |
Lamination |
For additional protection, liquid or spray coatings are recommended |
PageWide cutter |
The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter |
Shelf life |
1 year, unopened in original packaging |
Storage temperature |
10 to 27° C / 50 to 80° F |
Storage humidity |
35 to 65% RH |
Environmental |
REACH compliant1 |
Finishing/post-processing |
Use a carbide knife for kiss and die-cutting |
Installation tip |
To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting. |
Reviews
There are no reviews yet.